N50-007SF HYUNDAI HiRUN Compact Size AC Drive Inverter

Home

N50

N100

N300

N700

N50-007SF HYUNDAI HiRUN Powerful Operation & Compact Size AC Drive Inverter

Features

Vector inverter for single phasing input only

–High torque of 200% or greater at speeds as low as 1 Hz during starting

and operation.

Realize tripless driving by adding current suppression

–Stable operation even under the instantaneous impact load and overload

is realized through the addition of over-current level adjusting function.

–Maintain constant speed even at the time of sudden load change

by rapid speed restoration characteristics.

–Applicable to the transfer machine, treadmill, industrial washing machine

due to its function of momentary current suppression.

Possible to select various operation methods

–It is possible to select the operation methods of either RS485 communication

driving or analog signal driving for the user’s convenience.

Compact size for simplicity to install

–Reduction in cubic volume, 52% compare to the N100 series.

Develop optional product for user’s convenience

–DOP05 : Economical remote operator Operation & display function

Specifications

Model			N50-007SF
Output	Applicable motor capacity (kW)		0.75
	Rated output capacity (kVA)		1.9
	Rated output current (A)		5.0
	Rated output voltage (V)		3-phase, 200~230 V
	Maximum output frequency (Hz)		400 Hz
Input	Voltage / frequency		Single phase, 200~230Vac, 50/60 Hz
	Power conditions		Voltage: ±10% / frequency: ±5%
Control Characteristic	PWM method		Space vector PWM
	Control method		V/F control, sensorless vector control
	Output frequency range		0.5 ~ 400 Hz
	Frequency setting resolution	Analog	Max. setting frequency÷1000 (DC10 V, 4~20 mA)
		Digital	0.01 Hz (100 Hz and less ), 0.1 Hz (100 Hz or more )
	Frequency precision	Analog	Within 0.1% of maximum output frequency
		Digital	Within 0.01% of maximum output frequency
	Overload rating		150% of rated current for 1 minute
	Starting torque		More than 200% (at 1 Hz)
	Torque boost		Manual torque boost can be set between 0~50%
	Acceleration/deceleration time setting		0.1~3000 sec
	Acceleration/deceleration pattern		Linear, S-curve, U-curve
	Current stall prevention operation level		Operating current level setting possible(20~200%), enable/disable selection
	Voltage stall prevention operation level		Operating current level constant, enable/disable selection
	Analog frequency setting		DC 0~5 V or DC 0~10 V / 4~20 mA

Samcheondong 1Ga 651-2 Wansangu Jeonjusi Jeonbuk 560-807 KOREA

Tel : +82-63-228-0560 Fax : +82-63-228-0561 e-mail : akorm@akorm.com Website : www.akorm.com/industrial

Copyright (C) AKORM Corporation All Rights Reserved